220V DC AC Inverter For Home

 
220Vac / 230Vac / 240Vac DC AC Inverter 10Kw With 48Vdc And Sinusoidal Output
 

Model: Pure Sine Wave Inverter Charger Power Star Series 1KW-12KW (1ph in/1ph out)     
 
 
Key Features:
 
On inverter
● High overload ability 
● Low battery voltage trip selectable, extracting max power from various batteries with different  protections 
● Low quiescent current, selectable sensing cycle to reduce power consumption
 
On battery charge
● 3-step intelligent battery charging 
● 8 preset battery type selector plus de-sulphation for totally flat batteries 
● Powerful charge rate up to 100Amp ,selectable charging current 
● PFC(Power Factor Correction) for charger, less power consumption than conventional units
 
On Transfer
● Delay before transfer, extra protections for loads under generator mode 
● Input AC voltage range selectable, for different kinds of loads 
● 8 ms typical transfer time, guarantees power continuity 
● 30A/40A through current ability 
● Output voltage regulation optional
 
On remote control & other features
● Ability to switch the unit on/off 
● Ability to select/deselect power saver mode 
● 17 alarms/warnings, informative for easier operation and trouble-shooting
● LCD status display available 
● RS232 communication port optional
 
 
Application
Home & Office
 
 
Technical Specification

STI 300W power inverter DC-AC, DC/AC inverter

STI series is a sine wave power frequency inverter which can convert 12V/24V/48Vdc to 220V/230V 50Hz based on full digital and intelligent design. It features high reliability, high efficiency, concise outline, full protection functions, easy installation and operation. The inverter can be applied in many fields especially for solar photovoltaic power system.

Feather:

• Complete isolation-type inverter technology, noiseless output
• Adoption of advanced SPWM technology, pure sine wave output
• Dynamic current loop control technology to ensure inverter reliable operation.
• Wide DC input voltage range
• Excellent EMC design
• Low output harmonic distortion（THD≤3%）
• LED indicators display input voltage range, load power range, normal output & failure state
• Optional energy saving mode
• Wide working temperature range (industrial level)
• Continuous operation at full power

PRODUCT FAMILY

STI200/STI300/STI500/STI700/STI1000

12V/24V/48V

200W,300W,500W,700W,1000W

ELECTRONIC PROTECTIONS

• Output Short Circuit protection
• Overload protection
• Input reverse polarity protection
• Input low voltage protection
• Input over voltage protection
• Inverter abnormal protection
• Overheating protection

Application

Output socket(option)

Universal European Australia/New Zealand

STI series

www.jhk-power.com

TECHNICAL SPECIFICATIONS

※Technical data at 25℃.

MT

All product specifications are subject to change without notice.

High Quality Digital LCD Display Modified Sine Wave Home Power Inverter 2000va

Specifications:

Home Power Inverter 2000va Description:

1. Modiified sine wave output

2. Electricity-Battery automatic conversion 
3. Different choice of input voltage range
4. High-frequency digital technology, MCU control, more stable capablity
5. High efficiecy rate of DC - AC conversion, minimize energy loss 
6. Tower design, can both stand up and lay down, can be placed flexibly
7. Equiped with super-charger, the maximum electricity can reach 8 A, and can charge for batteries with electricity over 100 AH 
8. Intelligent charge control, can ensure the effective charging,but can not avoid excessive charging 
9. Ultra-load protection 

10. Restoration of electricity, automatically activated 
11. Offline-charging functions (when the utility comes to normal, even if it is not turned on, the machine can still charge the battery) 
12. Multi-functional LED indicator light and alarm device

13. Widely used in light, fan, or other small power home appliance

14. Small shape and light weight design,easily to carry and installation

Home Power Inverter 2000va Competitive Advantage:

Cheap price and easy to install,can solve the problem of power cutting off immediately,its small shape won’t need much space,and with no noises when it works.

The home inverter can be designed with your requirements such as color,logo,shape,display type and rear panel.

Modified Sine Wave Home Inverter 2000va

PV Solar Inverter With Digital Lcd Display And 12v 24v 48Vdc For Home
 
Key Features:
On inverter
1: High overload ability 
2: Low battery voltage trip selectable, extracting max power from various batteries with different  protections 
3: Low quiescent current, selectable sensing cycle to reduce power consumption
 
On battery charge
1: 3-step intelligent battery charging 
2: 8 preset battery type selector plus de-sulphation for totally flat batteries 
3: Powerful charge rate up to 100Amp ,selectable charging current 
4: PFC(Power Factor Correction) for charger, less power consumption than conventional units
 
On Transfer
1: Delay before transfer, extra protections for loads under generator mode 
2: Input AC voltage range selectable, for different kinds of loads 
3: 8 ms typical transfer time, guarantees power continuity 
4: 30A/40A through current ability 
5: LED Indicators: Inverter, Fault, Charge and Full
 
On remote control & other features
1: Ability to switch the unit on/off 
2: Ability to select/deselect power saver mode 
3: battery equalization with remote temperature sensor for increased performance
4: LCD status display available 
5: RS232 communication port optional
6: Adopting high-frequency isolation transformer type, high efficiency, and high security

Applications;

Renewable energy systems (solar, wind and hydro electric),Emergency lighting systems,UPS Power System,Alarm Systems,solar energy etc.

Technical Specification

 
Single Phase Power Inverter 8Kw - 15Kw with Sinewave Output And LCD Display
 

Model: Pure Sine Wave Inverter Charger Power Star Series 1KW-12KW (1ph in/1ph out)     
 
 
Key Features:
 
On inverter
● High overload ability 
● Low battery voltage trip selectable, extracting max power from various batteries with different  protections 
● Low quiescent current, selectable sensing cycle to reduce power consumption
 
On battery charge
● 3-step intelligent battery charging 
● 8 preset battery type selector plus de-sulphation for totally flat batteries 
● Powerful charge rate up to 100Amp ,selectable charging current 
● PFC(Power Factor Correction) for charger, less power consumption than conventional units
 
On Transfer
● Delay before transfer, extra protections for loads under generator mode 
● Input AC voltage range selectable, for different kinds of loads 
● 8 ms typical transfer time, guarantees power continuity 
● 30A/40A through current ability 
● Output voltage regulation optional
 
On remote control & other features
● Ability to switch the unit on/off 
● Ability to select/deselect power saver mode 
● 17 alarms/warnings, informative for easier operation and trouble-shooting
● LCD status display available 
● RS232 communication port optional
 
Technical Specification

220vac 230vac 240vac DC AC Inverter 50Hz For Office Equipment

Model: Pure Sine Wave Inverter Charger Power Star Series 1KW-12KW (1ph in/1ph out)     
 
Inverter Quick Overview
1: The perfect protection function
2: Inverter with Bypass Function
3: Inverter with overload over charging and low battery protection
4: Quick and easy installation
 
Key Features

1: Durable construction for long life under extreme environmental conditions
2: Microprocessor control guarantees high reliability
3: High-Speed Synchronous Conversion
4: Accept generator's energy output
5: Automatically transfer between battery and line modes
6: Reverse connection(optional by hard connector)
7: LCD digital display show voltage, load and battery info in real time
8: Small, light and artistic, benefited from adopting the SMD paster technology
9: Protection against:Over load, over temperature, over charging, low battery
10: Fast and powerful charger with 35A and 70A
11: Designed to suitable for critical grid environment
 
Application  

UPSEN Power Srar Inverter can be used for various home appliances, office equipment, solar power system, Communication equipment,Solar electric energy generation,Wind power generation etc.

Technical Specification

 
* Specification is subject to change without prior notice.
 
Competitive Advantages:

1: Three Years' warranty for sinewave inverter, and 1% free UPS or 2% free PCB Boards
2: Good after-sales service, we will be full responsible for any faults caused by our side
3: Professional experience in power field more than 10 years
4: Professional technical support before and after sales
5: Timely response, fast delivery time and flexible operations to satisfy any customers' special requests.
6: Free OEM & ODM Service
7: Competitive price, quality and mature products
 

30KW Bi-Dicetional Solar Inverter with On Grid and Off Grid Function

Specification:

Description:

Bi-grid inverter can not only convert the DC power into AC power,but also can invert the AC power to DC power.Bi-grid inverter mainly control the battery’s charging and discharging,at same time it is the core control equipment.Bi-grid inverter can apply in the grid ties power system which has the requirement  of power storage function.The power storage system is for the the emerging load or important load charging.It can combine with the string inverter and then construct the separated PV power system.

Bi-grid inverter charged by batteries ,convert the DC power into AC power.Constructing the Grid at the basis of the AC general line.String grid inverter can automatically test the solar battery array with enough power or not.Testing the grid whether meet the need of grid power.When meeting the need can go into the grid power mode,feeding power to the AC general line.,then the work of starting the system was completed.When normally operating .Bi-grid inverter will test the power using of the load .The power feeding to the grid from string grid inverter firstly for the load charging.If there is rest power ,BI-grid inverter will convert it into DC power and charge the battery.If the power feeding to the grid is not enough for the load,Bi-grid inverter will convert the DC power supplied by battery into AC power and feed into the AC general line for the using of the load.